Christine still remembers the marketing director who showed up at Mandalay Bay Convention Center move-in with a gorgeous 360 booth rig and no power order on file. The booth worked fine. The outlet never got approved in time to run it. Every photo booth, from a simple open-air setup in a Henderson backyard to a branded activation on a convention floor, runs on electricity someone has to plan for, and at Las Vegas venues that planning looks different depending on where you're setting up.
In This Guide
- A Classic Open-Air Booth Needs One Standard 15-Amp Outlet
- A 360 Video Booth Draws More Power Than a Classic Booth
- Convention Venues Order Power Drops Through the Show, Not the Vendor
- COI and EAC Paperwork Determines Who Can Touch the Power Line
- Outdoor and Backyard Events Need a Generator or Extension-Cord Plan
- Power Checklist to Send Your Photo Booth Vendor Before Load-In
- FAQ
A Classic Open-Air Booth Needs One Standard 15-Amp Outlet
Most classic open-air and glam booths run on a single standard 15-amp household-style outlet, the same circuit a lamp or laptop charger uses. The printer, camera rig, and ring light together typically stay well under that limit, so most ballrooms, hotel event spaces, and backyard patios already have enough juice without any special requests.
We ask every client to confirm one outlet within 15 to 25 feet of the booth footprint before we arrive. Running a cord across a dance floor or guest walkway is a trip hazard, and a lot of venues flag it during the day-of walkthrough and make you reroute on the spot.
A short conversation about outlet placement during booking saves a scramble during setup. Ask your vendor where they need power, then confirm that spot actually has an outlet.
A 360 Video Booth Draws More Power Than a Classic Booth
The rotating rig on a 360 video booth adds a motor, extra LED ring lighting, and sometimes a secondary tablet station for guest check-in. Put those together and total draw runs higher than a classic open-air setup, even though neither one usually requires a dedicated circuit.
Venues with older wiring or shared circuits, which shows up more than you'd expect in older hotel ballrooms, can trip a breaker if the booth is sharing an outlet with catering warmers or a DJ rig. Ask the venue which outlets are dedicated before you commit to a floor plan.
| Booth Type | Typical Outlet Need | Shared-Circuit Risk |
|---|---|---|
| Classic open-air | One standard 15-amp outlet | Low |
| 360 video booth | One 15-20 amp outlet, ideally dedicated | Moderate, higher near catering or DJ equipment |
| Marquee letter lighting | Standard outlet, varies by letter count | Low to moderate depending on string count |
If your event is pairing a booth with marquee letters or a full branded backdrop, map out every piece that plugs in, not just the booth itself, before you finalize the room layout.
Convention Venues Order Power Drops Through the Show, Not the Vendor
At Las Vegas Convention Center, Mandalay Bay Convention Center, and Venetian Expo, electrical service for a booth or brand activation is ordered through the show's official service kit or the venue's exhibitor services department, not installed directly by a photo booth vendor. Venetian Expo's own guidance confirms that exhibitors order dedicated power drops through its exhibitor services process rather than having an outside vendor install power directly (venetianexpo.com). Mandalay Bay Convention Center routes electrical and utility orders for booths and activations through its official service kit the same way (mandalaybay.com).
Equipment that a crew can hand-carry in, like an open-air booth, a backdrop stand, and props, is typically vendor-handled at these venues under general hand-carry allowances. The power drop itself is a separate order, placed with the show weeks ahead of move-in, and specifics vary by show organizer, so confirm the exact process in the venue's published vendor packet.
Marketing directors planning a booth at a trade show should request the power order form in the same email as the exhibitor badge request, not wait until move-in week. For a side-by-side look at how these three venues differ on vendor rules, see our LVCC vs Venetian Expo vs Mandalay Bay vendor rules breakdown.
COI and EAC Paperwork Determines Who Can Touch the Power Line
A professional vendor should be able to return a certificate of insurance (COI) within a day of the request, naming the venue and sometimes the show organizer as additional insured using the exact legal entity name the venue specifies. That paperwork is what gets a vendor cleared to be on the floor at all, long before anyone touches a power cord.
Exhibitor-appointed contractor (EAC) status is a separate approval, and it often has its own deadline that closes weeks before move-in. Christine puts it plainly: "I've had marketing teams call me the week of a show asking if we can still get on the floor, and the honest answer depends entirely on whether the EAC paperwork went in on time. That's not something we can fix on move-in day."
Ask about the EAC deadline on the first vendor call, not during load-in week. Missing it can mean the vendor isn't legally permitted to work the show floor, no matter how early the booth itself was booked. Our guide to EAC-compliant vendors at Las Vegas venues walks through what that paperwork actually covers.
Outdoor and Backyard Events Need a Generator or Extension-Cord Plan
Backyard receptions in Summerlin, Henderson, and Paradise usually have a patio outlet within reach, but desert heat in summer months means AC units and string lights can already be pulling from the same circuit. It's worth asking the homeowner or venue what else is plugged into that outlet before the booth shows up.
For true off-grid setups, a quiet inverter generator sized for a 15-20 amp draw covers a booth comfortably. Confirm fuel storage and noise rules with the venue or HOA before booking one; some private venues restrict generators entirely.
Any extension cord crossing a guest path should be a rated outdoor cord with a cord cover or mat. General OSHA workplace guidance recommends covering or routing extension cords away from walkways to prevent trip hazards (osha.gov), and that same logic holds at a wedding reception just as much as on a convention floor. For more on weather and outdoor setup planning on the Strip, see weather considerations for outdoor photo booths in Las Vegas.
The rule of thumb we use on every outdoor setup: if a guest could walk over the cord in heels or flip-flops, it needs a cover. No exceptions.
Power Checklist to Send Your Photo Booth Vendor Before Load-In
Send this to your vendor and your venue contact in the same email thread so everyone is working off the same list.
- Confirm one dedicated outlet or circuit within 25 feet of the booth footprint.
- Ask whether the venue or show requires power to be ordered separately from vendor setup.
- Request the EAC and COI deadlines in writing during the first call.
- For outdoor events, confirm generator policy or outlet access with the venue or homeowner.
- Walk the load-in route for cord-crossing points and plan cord covers ahead of time.
This is the same list Christine keeps in her day-of kit, because the questions don't change much between a backyard wedding and a convention floor, only who you're asking.
FAQ
Does a photo booth need a dedicated power circuit at a Las Vegas venue?
Most classic open-air booths run fine on a standard 15-amp outlet shared with other light loads. Convention venues and some hotel ballrooms, though, often route booth power through the show's official service order rather than letting a vendor plug into a house outlet, so confirm the process with the venue's vendor packet before the event.
Can I run an extension cord to a photo booth outdoors?
Yes, with a rated outdoor extension cord and a cord cover anywhere it crosses a guest walkway. OSHA's general guidance against unprotected walkway cords applies at private events the same way it does on a convention floor. Confirm outlet location and generator rules with the venue ahead of load-in.
Who orders electrical power drops at LVCC, Mandalay Bay, or Venetian Expo?
At these venues, power for a booth or activation is typically ordered through the show's official service kit or the venue's exhibitor services department, not installed directly by the photo booth vendor. Equipment that fits in a hand-carry load is usually vendor-handled; the power drop itself is a separate order placed well ahead of move-in.
How many amps does a 360 photo booth need compared to a classic booth?
A 360 video booth's rotating rig and extra ring lighting draw more than a classic open-air setup, which can matter on an older or shared circuit. Ask the venue which outlets are dedicated rather than shared with catering equipment or a DJ rig, especially in hotel ballrooms.
What happens if I miss a convention venue's EAC or power deadline?
EAC paperwork and power orders at major Vegas convention venues often close weeks before move-in. Miss the deadline and the vendor may not be legally permitted to work the show floor, regardless of how early the booth itself was booked. Put the deadline question on the first vendor call, not move-in week.
Planning a trade show activation and need a vendor who already knows the power and EAC process at LVCC, Mandalay Bay, and Venetian Expo? Get a quote for your trade show photo booth and we'll walk through the paperwork with you before you ever book a date.



